China wholesaler 6300kg Hydraulic Truck Mounted Crane CZPT Brand for Sale attaching pto shaft to tractor

Product Description

Product Description

6300kg hydraulic truck mounted crane CZPT brand for sale

Item

Unit

HY6.3S4

Max.Lifting Moment

Ton . M

15.7

Max.Working Radius

M

11.2

Max.Working High

M

13.2

Slewing Angle

.

360°Azimuthing

Installation Space

Mm

920

Outrigger Span

Mm

5120

Crane Self Weight

Kg

2200

Our Advantages

HangZhou Haoyi Construction Machinery Technology Co.,ltd, was established in 2571 and is located at No.16 Xihu (West Lake) Dis. Road,
HangZhou High-tech Development Zone. It mainly produces truck-mounted cranes, hydraulic cranes,aerial work vehicles,
and other customized mechanical products. HaoYi has developed series of control system for truck mounted crane, aerial
lift fire vehicle, aerial work platform truck, rescue crane, high pressure aerial water jet fire vehicle, marine crane and other
products. Providing a variety of solutions to our valued customers. All above products have been widely applied in logistic,
fire fight equipment, railway track, petrochemical industry, engineering machinery, ship building, municipal public works,
park maintenance and other fields.
A. Materials:
Structural parts and hinge shafts: Our structural parts are all made of high-strength plates, such as key stress-bearing parts, are made of 70KG/80KG, or even 90kg high-strength steel plates (HG60, BS900), and the hinge shafts of key parts are all made of high-strength steel plates. 40Cr, or 42CrMo tempered and quenched. Advantages: high strength, strong bearing capacity, longer service life:
Oil red: Our hydraulic cylinders all adopt domestically well-combined seals, and we use main road seals, the outermost layer is a dust-proof ring, the inside is a support pad, and then a seal ring, and the product is guaranteed through multiple seals. Quality, advantages: long service life, not easy to aging, very low oil leakage rate
Pipeline: CZPT standard high-pressure pipe is used. The joint adopts a 24° cone, ferrule and screw fit, not a commonly used O-ring. After the ferrule nut is installed, there will never be oil leakage, and the O-ring The ring is easy to age, advantages: stronger high pressure resistance and more durable;
Operation and safety valves: all adopt domestic famous brands, the valve cores are all imported, and the valve blocks are all domestically produced. Advantages: both quality and price, low oil leakage rate.
Oil pump: HangZhou Saiyuan gear pump used below 6.3 tons, plunger pump from HangZhou High Pressure Oil Pump Factory for folding arm and above 8 tons. Advantages: large speed range, reliable operation, long service life and convenient maintenance.
Slewing mechanism: powerful slewing, capable of 360° continuous rotation, advantages: easy operation, long life:
Hydraulic lifting mechanism: hydraulic winch, powerful hoisting, low noise, safe and reliable, fast lifting speed, advantages: long life, high efficiency:
Steel wire rope: multi-strand thin wire anti-rotation steel wire rope, advantages: high strength, good flexibility, no winding, high safety, safe and durable:
B. Process:
Automatic boom welding, good workmanship, good weld quality, good weld shape, less weld joints, no false welding, false welding, much better than manual welding, no pores, trachoma, cracks, unfused and other defects . Advantages: beautiful appearance, good weld quality.
Longer boom life:
The high-strength plate is pre-treated before welding to reduce welding stress, reduce post-weld deformation, and ensure the overall straightness of the long boom.
Polygonal boom: below 6 and 3 tons are pentagonal, and above 8 tons are similar to U-shaped booms: Advantages: good bending and torsion resistance, large bearing capacity, reducing self-weight and increasing boom strength:
The advantages of the polygonal turntable column: good bending and torsion resistance, large bearing capacity, reducing self-weight and increasing structural strength:
Sandblasting and shot blasting treatment after welding, benefits: rust removal (knock off the oxide skin on the surface), eliminate welding stress, form pitting on the surface (0.1-0.2mm dents), and improve the adhesion of the paint surface.
 

After Sales Service

1 year after sale, if there is a problem within 1 year,free spares

FAQ

1) How many years of your factory?
We have 12 years production and nearly 10 years experience, we exported to more than 50 countries & regions.And we are a manufacturer specialized in truck crane,pickup crane,aerial platform truck,marine crane.

2) Which kind of payment you can be accepted?
Normally both of T/T & L/C at sight are ok for us.Alibaba trade assurance,credit card,western union.

3) How about the delivery time?
20-40 working days after received 30% T/T or L/C.70% balance payment before shipping.

4) What’s your warranty?
Normally is 1 year, if large quantities we can negotiate.We will mail the accessories to you for free if have problems within 1 year.

5) What’s your MOQ?
MOQ: 1 set

6) Can you accept OEM service?
Yes for sure my friend.We provide logo,package,customized,and also can customized the product according to your requirements.

7) Optional Attachment?
Remote Control, Basket, Auger, Grapple, Top Seat, Rear Legs

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: 1 Year After Sale
Warranty: 1 Year After Sale
Certification: CE, ISO9001
Samples:
US$ 12600/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

Shaft Collar

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China wholesaler 6300kg Hydraulic Truck Mounted Crane CZPT Brand for Sale   attaching pto shaft to tractorChina wholesaler 6300kg Hydraulic Truck Mounted Crane CZPT Brand for Sale   attaching pto shaft to tractor
editor by CX 2023-06-05