توضیحات محصول
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
توضیحات محصول
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CHINAMFG the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
بسته بندی و حمل و نقل
مشخصات شرکت
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
سوالات متداول
1.What’re your main products?
we currently product Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gear pump and motor.You can check the specifications for above product on our website and you can email us to recommend needed product per your specification too.
2.What’s your warranty terms?
One year.
3.What’s the lead time for a regular order?
Generally speaking, our regular standard product will need 30-45days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
4.What’s the payment term?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
5.Can you send me a price list?
For all of our product, they are customized based on different requirements like length, ratio,voltage,and power etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.
6.How to deliver the goods to us?
Usually we will ship the goods to you by sea.
Other Products
/* 22 ژانویه 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*&4?)):(.*)
| نوع: | Agricultural Spare Part, Agricultural Spare Part |
|---|---|
| کاربرد: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor, Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery, Farm Tractor |
| مواد: | Carbon Steel, 45cr Steel, Carbon Steel |
| نمونهها: |
US$ 20/Piece
۱ قطعه (حداقل سفارش) | نمونه سفارش |
|---|
| سفارشی سازی: |
موجود است
| درخواست سفارشی |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
هزینه ارسال:
هزینه حمل و نقل تخمینی برای هر واحد |
در مورد هزینه ارسال و زمان تقریبی تحویل. |
|---|
| روش پرداخت: |
|
|---|---|
|
پرداخت اولیه پرداخت کامل |
| ارز: | US$ |
|---|
| بازگشت و بازپرداخت: | شما میتوانید تا 30 روز پس از دریافت محصولات، درخواست بازگشت وجه خود را ثبت کنید. |
|---|
هنگام انتخاب شفت PTO مناسب برای یک کاربرد، چه عواملی باید در نظر گرفته شوند؟
هنگام انتخاب شفت PTO مناسب برای یک کاربرد، عوامل متعددی باید در نظر گرفته شوند تا عملکرد، ایمنی و سازگاری بهینه تضمین شود. شفتهای PTO اجزای حیاتی هستند که نیرو را از منبع تغذیه به ماشینآلات یا تجهیزات محرک منتقل میکنند. در اینجا عوامل کلیدی که باید هنگام انتخاب شفت PTO مناسب برای یک کاربرد در نظر گرفته شوند، آورده شده است:
۱. برق مورد نیاز: توان مورد نیاز ماشینآلات محرک، نقش حیاتی در تعیین شفت مناسب PTO ایفا میکند. توان نامی منبع تغذیه (اسب بخار) یا کیلووات (کیلووات) را در نظر بگیرید و مطمئن شوید که شفت PTO میتواند انتقال توان مورد نیاز را انجام دهد. برای اطمینان از عملکرد کارآمد و قابل اعتماد، ضروری است که ظرفیت توان شفت PTO با توان خروجی منبع تغذیه مطابقت داشته باشد.
۲. الزامات سرعت و گشتاور: الزامات سرعت و گشتاور ماشینآلات محرک را در نظر بگیرید. سرعت چرخش و سطح گشتاور مورد نظر را برای عملکرد مؤثر تجهیزات تعیین کنید. برخی از کاربردها به نسبتهای سرعت یا گشتاور خاص نیاز دارند، در حالی که برخی دیگر ممکن است به سرعتهای متغیر نیاز داشته باشند. اطمینان حاصل کنید که شفت PTO انتخاب شده میتواند محدوده سرعت و گشتاور مورد نیاز را برای انتقال توان لازم فراهم کند.
۳. نوع و طراحی شفت: نوع و طراحی شفت PTO را ارزیابی کنید تا از سازگاری آن با کاربرد اطمینان حاصل شود. عواملی مانند فاصله بین منبع تغذیه و ماشین آلات محرک، نیاز به ناهمراستایی زاویهای و انعطافپذیری حرکت مورد نیاز را در نظر بگیرید. انواع مختلف شفت، مانند شفتهای استاندارد، تلسکوپی یا شفتهای سرعت ثابت (CV)، قابلیتهای متنوعی را برای تطبیق با نیازهای مختلف کاربرد ارائه میدهند.
۴. ملاحظات ایمنی: ایمنی یک عامل حیاتی در انتخاب شفت PTO است. ویژگیهای ایمنی ارائه شده توسط شفت PTO، مانند محافظهای محافظ، مکانیزمهای پیچ برشی یا سایر وسایل ایمنی را ارزیابی کنید. محافظهای محافظ باید در محل قرار داشته باشند تا از تماس تصادفی با شفت چرخان جلوگیری شود. مکانیزمهای پیچ برشی میتوانند اجزای سیستم انتقال قدرت را در صورت گشتاور بیش از حد یا مقاومت ناگهانی از آسیب محافظت کنند. ویژگیهای ایمنی را که با خطرات و ریسکهای خاص مرتبط با کاربرد همسو هستند، در اولویت قرار دهید.
۵. مشخصات کاربرد: الزامات منحصر به فرد کاربرد را در نظر بگیرید. عواملی مانند نوع ماشین آلات، بخش صنعت، شرایط محیطی و شرایط عملیاتی باید در نظر گرفته شوند. به عنوان مثال، کاربردهای کشاورزی ممکن است به شفتهای PTO نیاز داشته باشند که بتوانند زبالهها و تجمع خاک را تحمل کنند، در حالی که کاربردهای صنعتی ممکن است به شفتهای PTO با مقاومت بالا در برابر خوردگی یا آببندی ویژه برای محافظت در برابر آلایندهها نیاز داشته باشند.
۶. سازگاری و قابلیت تعویض: مطمئن شوید که شفت PTO انتخاب شده با منبع تغذیه و ماشین آلات محرک سازگار است. عواملی مانند قطر شفت، اندازه اسپلین و نوع اتصال را در نظر بگیرید. بررسی کنید که آیا شفت PTO با استانداردهای صنعتی مطابقت دارد و آیا در صورت نیاز به تعویض یا ارتقاء، میتوان آن را به راحتی با سایر اجزای سازگار تعویض کرد. سازگاری و قابلیت تعویض میتواند تعمیر و نگهداری را ساده کرده و زمان از کارافتادگی را کاهش دهد.
۷. تولیدکننده و کیفیت: برای اطمینان از کیفیت و قابلیت اطمینان شفت PTO، یک تولیدکننده یا تأمینکننده معتبر انتخاب کنید. به دنبال تولیدکنندگانی باشید که سابقه تولید شفتهای PTO با کیفیت بالا و مطابق با استانداردها و مقررات صنعتی را دارند. هنگام انتخاب، عواملی مانند گارانتی، پشتیبانی پس از فروش و در دسترس بودن قطعات یدکی را در نظر بگیرید.
با در نظر گرفتن این عوامل، میتوانید شفت PTO مناسبی را انتخاب کنید که الزامات قدرت، سرعت، گشتاور، ایمنی و کاربرد را برآورده کند. توصیه میشود برای اطمینان از تطابق بهینه بین شفت PTO و کاربرد، با متخصصانی مانند تولیدکنندگان تجهیزات یا متخصصان شفت PTO مشورت کنید.
How do PTO shafts contribute to the efficiency of agricultural operations?
Power Take-Off (PTO) shafts play a crucial role in improving the efficiency of agricultural operations by providing a versatile and reliable power source for various farming equipment. PTO shafts allow agricultural machinery to access power from tractors or other prime movers, enabling the efficient transfer of energy to perform a wide range of tasks. Here’s a detailed explanation of how PTO shafts contribute to the efficiency of agricultural operations:
1. Versatility: PTO shafts offer versatility by allowing the connection of different types of implements and machinery to tractors or other power sources. This versatility enables farmers to use a single power unit, such as a tractor, to operate multiple agricultural implements, including mowers, balers, tillers, seeders, sprayers, and more. The ability to quickly switch between various implements using a PTO shaft minimizes downtime and maximizes efficiency in agricultural operations.
2. Power Transfer: PTO shafts efficiently transfer power from the tractor’s engine to the agricultural implements. The rotating power generated by the engine is transmitted through the PTO shaft to drive the machinery connected to it. This direct power transfer eliminates the need for separate engines or motors on each implement, reducing equipment costs and maintenance requirements. PTO shafts ensure a reliable power supply, allowing agricultural operations to be carried out efficiently and effectively.
3. Increased Productivity: By utilizing PTO shafts, agricultural operations can be performed more quickly and efficiently than manual or alternative power methods. PTO-driven machinery typically operates at higher speeds and with greater power compared to human-operated or manual tools. This increased productivity allows farmers to complete tasks such as tilling, seeding, harvesting, and material handling more efficiently, reducing labor requirements and increasing overall farm productivity.
4. Time Savings: PTO shafts contribute to time savings in agricultural operations. The ability to connect and disconnect implements quickly using standardized PTO shafts allows farmers to switch between tasks rapidly. This saves time during equipment setup, as well as when transitioning between different operations in the field. Time efficiency is particularly valuable during critical farming periods, such as planting or harvesting, where timely execution is essential for optimal crop yield and quality.
5. Reduced Manual Labor: PTO shafts minimize the need for manual labor in strenuous or repetitive tasks. By harnessing the power of tractors or other prime movers, farmers can mechanize various operations that would otherwise require significant physical effort. Agricultural implements driven by PTO shafts can perform tasks such as plowing, mowing, and baling with minimal human intervention, reducing labor costs and improving overall efficiency.
6. Precision and Consistency: PTO shafts contribute to precision and consistency in agricultural operations. The consistent power supply from the PTO ensures uniform operation and performance of the connected machinery. This helps in achieving consistent seed placement, even spreading of fertilizers or chemicals, and precise cutting or harvesting of crops. Precision and consistency lead to improved crop quality, enhanced yield, and reduced waste, ultimately contributing to the overall efficiency of agricultural operations.
7. Adaptability to Various Terrain: PTO-driven machinery is highly adaptable to various types of terrain encountered in agricultural operations. Tractors equipped with PTO shafts can traverse uneven or challenging terrain, allowing implements to operate effectively on slopes, rough fields, or hilly landscapes. This adaptability ensures that farmers can efficiently manage their land, regardless of topographical challenges, enhancing operational efficiency and productivity.
8. Integration with Automation and Technology: PTO shafts can be integrated with automation and technology advancements in modern agricultural practices. Automation systems, such as precision guidance and control, can be synchronized with PTO-driven machinery to optimize operations and minimize waste. Additionally, advancements in data collection and analysis allow farmers to monitor and optimize machine performance, fuel efficiency, and productivity, further enhancing the efficiency of agricultural operations.
By providing versatility, efficient power transfer, increased productivity, time savings, reduced manual labor, precision, adaptability to terrain, and integration with automation and technology, PTO shafts significantly contribute to enhancing the efficiency of agricultural operations. They enable farmers to perform a wide range of tasks with ease, ultimately improving productivity, reducing costs, and supporting sustainable farming practices.
What is a PTO shaft and how is it used in agricultural and industrial equipment?
A power take-off (PTO) shaft is a mechanical component used in agricultural and industrial equipment to transfer power from a power source, such as an engine or motor, to another machine or implement. It is a driveline shaft that transmits rotational power and torque, allowing the connected equipment to perform various tasks. PTO shafts are commonly used in agricultural machinery, such as tractors, as well as in industrial equipment, including generators, pumps, and construction machinery. Here’s a detailed explanation of what a PTO shaft is and how it is used:
Structure and Components: A typical PTO shaft consists of a hollow metal tube with universal joints at each end. The hollow tube allows the shaft to rotate freely, while the universal joints accommodate angular misalignments between the power source and the driven equipment. The universal joints consist of a cross-shaped yoke with needle bearings, providing flexibility and allowing the transmission of power at varying angles. Some PTO shafts may also include a telescopic section to adjust the length for different equipment setups or to accommodate varying distances between the power source and the driven machine.
Power Transfer: The primary function of a PTO shaft is to transfer power and torque from the power source to the driven equipment. The power source, typically an engine or motor, drives the PTO shaft through a mechanical connection, such as a gearbox or a clutch. As the power source rotates, it transmits rotational force to the PTO shaft. The PTO shaft, in turn, transfers this rotational power and torque to the driven equipment, enabling it to perform its intended function. The torque and rotational speed transmitted through the PTO shaft depend on the power source’s characteristics and the gear ratio or clutch engagement.
Agricultural Applications: In agriculture, PTO shafts are commonly used in tractors to power various implements and attachments. The PTO shaft is connected to the tractor’s power take-off, a rotating drive shaft located at the rear of the tractor. By engaging the PTO clutch, the tractor’s engine power is transferred through the PTO shaft to the attached implements. Agricultural machinery, such as mowers, balers, tillers, sprayers, and grain augers, often rely on PTO shafts to receive power for their operation. The PTO shaft allows the implements to be powered directly by the tractor’s engine, eliminating the need for separate power sources and increasing the versatility and efficiency of agricultural operations.
Industrial Applications: PTO shafts also find extensive use in various industrial applications. Industrial equipment, such as generators, pumps, compressors, and industrial mixers, often incorporate PTO shafts to receive power from engines or electric motors. The PTO shaft connects the power source to the driven equipment, allowing it to operate and perform its intended function. In construction machinery, PTO shafts can be found in equipment like concrete mixers, hydraulic hammers, and post hole diggers, enabling the transfer of power from the machinery’s engine to the specific attachment or tool being used.
ملاحظات ایمنی: It is important to note that PTO shafts can pose safety risks if not handled properly. The rotating shaft can cause serious injuries if operators come into contact with it while it is in operation. To ensure safety, PTO shafts are often equipped with shielding or guards that cover the rotating shaft and universal joints, preventing accidental contact. It is crucial to maintain and inspect these safety features regularly to ensure their effectiveness. Additionally, operators should receive proper training on PTO shaft operation, including safe attachment and detachment procedures, as well as the use of personal protective equipment when working near PTO-driven machinery.
In summary, a PTO shaft is a mechanical component used in agricultural and industrial equipment to transmit power and torque from a power source to a driven machine or implement. It enables the direct power transfer from engines or motors to various equipment, increasing efficiency and versatility in agricultural and industrial operations. While PTO shafts offer significant benefits, operators must be aware of the associated safety considerations and take appropriate precautions to prevent accidents and injuries.
editor by CX 2024-03-15
