We Our company pays particular attention to customers’ needs, listening to the specific requirements of each customer and guaranteeing total satisfaction.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Center Pivot irrigation has been proven to be the most cost-effective irrigation system in the industry.Good performance on wather spray uniformance on wather spray uniformity, high efficiency and labor saving. Helping to overcome runoff,while increasing yield and save water. From the pivot point to the overhang, our center pivots are engineered, constructed, and field-tested to outperform any other equipment in your field.
Pivot, also called center pivot or clock pivot, is a large-scaled automatically running irrigation equipment, quite suitable for corn, wheat, alfalfa, potato, grain, vegetable and sugarcanes and cash crop etc, and even good for fruit tree, plant nursery A single pivot could cover a very large field. Comparing with the other irrigation way, the pivot has the following advantage:
1.The largest irrigation covering.
No need digging or much earthwork, only water recourse like ept or surface water, one single pivot could cover 1200acres within a short time. Bigger field, smaller investment.
2. Highest mechanical and automatic irrigation way.
One single labor could manage 10000acres field, as far as increasing productivity.
3. Water saving 30%~50%, spray uniformity reach 90%, adjust field climate, 20%~50% increasing of productivity is approved obviously.
4. Equipping with other agriculture machine to achieve irrigating, seeding, fertilizing, gathering in one step.
Technical parameters of center pivot irrigation system
| No. | Item | Span Specification |
| 1 | Center Pivot | 6 5/8”(168mm) or 8 5/8”(219mm) |
| 2 | Pipe Spec. | 5”(127mm);6 5/8”(168mm)or 8”(203mm) |
| 3 | Span Length | 37.5m;43.3;49.1;54.9;or 60.7 |
| 4 | Tire Spec. | 14.9-24 or 11.2-24;including Vacuum and inner tube |
| 5 | Cable Spec. | Armored Cable,passed the UL certification |
| 6 | Motor | UMC25.5:1(1.5hp) or UMC40:1(0.75hp) |
| 7 | Gear Box | UMC50:1 or ept 52:1 |
| 8 | Length of OH | 2.7m,5.5m,8.2m,11m,16.5m,19.5m or25m |
| Notice: 8 5/8”(219mm) pipes only suit to spans in 43.3m and 49.1m | ||
Parameters of different spans
| Diameter | Length(m) | Outlet Spacing | Crossing Altitude | G.W with water |
| 219 mm | 43.3 m | 192 cm or 288 cm | 2.99 m | 3410 kg |
| 49.1 m | 2.93 m | 3770 kg | ||
| 168 mm | 43.3 m | 192 cm or 288 cm | 2.99 m | 2580 kg |
| 49.1 m | 2.93 m | 2830 kg | ||
| 54.8 m | 2.86 m | 3080 kg | ||
| 60.6 m | 2.83 m | 3320 kg | ||
| 127 mm | 43.3 m | 192 cm or 288 cm | 3.02 m | 2160 kg |
| 49.1 m | 2.96 m | 2350 kg | ||
| 54.8 m | 2.89 m | 2580 kg | ||
| 60.6 m | 2.86 m | 2730 kg |
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
