제품 설명
제품 설명
| item | parameter |
| model | q750 |
| supporting power | 18 hp above |
| operating pressure | 1.5-2.5(mpa) |
| volume | 750L |
| rated power/speed | 480-550 r/min |
| drug pumps | diaphragm pump |
| flow | 14-16(L/min) |
| stirring method | back water stir |
| fan radius | 700 mm |
| nozzle number | 14 |
| dimensions | 2200*1000*1300(mm) |
| efficiency | about 4-5 acres/hour |
| spray radius | 5-6m |
| operating pressure | adjustable |
Detailed Photos
Introduction:
750 liter capacity trailed sprayer, integrated medicine box, using high-density polyethylene raw material, requires more than 18 horsepower tractor as traction power, It is mainly composed of a diaphragm pump, a fan deflector, 750L medicine box, wheeled chassis and 14 nozzles.
특징:
600L large-capacity medicine box, can spray 4-5 acres per hour, work efficiency is extremely high, the tractor provides
the CHINAMFG power, driven by the tractor’s rear output shaft.
Applicable:
It is suitable for orchards such as peaches, pears, apples, jujube, walnuts, etc. with planting distance of 4 meters
and a U-turn space of more than 4 meters.
Certifications
Packaging & Shipping
회사 소개
1. who are we?
We are based in ZheJiang , China, start from 2018,sell to South America(20.00%),South Asia(20.00%),Southeast Asia(15.00%),Eastern Asia(10.00%),North America(10.00%),Mid East(10.00%),Africa(10.00%),Eastern Europe(5.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
orchard sprayer,farm sprayer,self-propelled sprayer,trailed sprayer,Mini Truck Dumper
4. why should you buy from us not from other suppliers?
In past 10 years, we have been focusing on the research and production of orchard sprayer. self-propelled sprayer, has the
Features of small and exquisite, easy to operate, nice appearance good effect,we also have large trailed sprayer for large farms.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T;
Contact:
Theo Wang
/* 2571년 1월 22일 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Engine Power: | More Than 18 HP Tractor |
|---|---|
| Spray Range: | Radius 3m |
| After-sales Service: | Provide Free Wear Accessories |
| 샘플: |
US$ 1590/Piece
1개 (최소 주문 수량) | 주문 샘플 Tractor trialed sprayer
|
|---|
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
배송비:
단위당 예상 운송비. |
배송비 및 예상 배송 시간에 관한 정보입니다. |
|---|
| 결제 방법: |
|
|---|---|
|
초기 납부금 전액 지불 |
| 통화: | 미국$ |
|---|
| 반품 및 환불: | 제품 수령 후 최대 30일 이내에 환불을 신청할 수 있습니다. |
|---|
How do PTO shafts handle variations in length and connection methods?
PTO (Power Take-Off) shafts are designed to handle variations in length and connection methods to accommodate different equipment setups and ensure efficient power transfer. PTO shafts need to be adjustable in length to bridge the distance between the power source and the driven machinery. Additionally, they must provide versatile connection methods to connect to a wide range of equipment. Here’s a detailed explanation of how PTO shafts handle variations in length and connection methods:
1. Telescoping Design: PTO shafts often feature a telescoping design, allowing them to be adjusted in length to suit different equipment configurations. The telescoping feature enables the shaft to extend or retract, accommodating varying distances between the power source (such as a tractor or engine) and the driven machinery. By adjusting the length of the PTO shaft, it can be properly aligned and connected to ensure optimal power transfer. Telescoping PTO shafts typically consist of multiple tubular sections that slide into one another, providing flexibility in length adjustment.
2. Splined Shafts: PTO shafts commonly employ splined shafts as the primary connection method between the power source and driven machinery. Splines are a series of ridges or grooves along the shaft that interlock with corresponding grooves in the mating component. The splined connection allows for torque transfer while maintaining alignment between the power source and driven machinery. Splined shafts can handle variations in length by extending or retracting the telescoping sections while still maintaining a solid connection between the power source and the driven equipment.
3. Adjustable Sliding Yokes: PTO shafts typically feature adjustable sliding yokes on one or both ends of the shaft. These yokes allow for angular adjustment, accommodating variations in the alignment between the power source and driven machinery. The sliding yokes can be moved along the splined shaft to achieve the desired angle and maintain proper alignment. This flexibility ensures that the PTO shaft can handle length variations while ensuring efficient power transfer without placing excessive strain on the universal joints or other components.
4. Universal Joints: Universal joints are integral components of PTO shafts that allow for angular misalignment between the power source and driven machinery. They consist of a cross-shaped yoke with bearings that transmit torque between connected shafts while accommodating misalignment. Universal joints provide flexibility in connecting PTO shafts to equipment that may not be perfectly aligned. As the PTO shaft length varies, the universal joints compensate for the changes in angle, allowing for smooth power transmission even when there are variations in length or misalignment between the power source and driven machinery.
5. Coupling Mechanisms: PTO shafts utilize various coupling mechanisms to securely connect to the power source and driven machinery. These mechanisms often involve a combination of splines, bolts, locking pins, or quick-release mechanisms. The coupling methods can vary depending on the specific equipment and industry requirements. The versatility of PTO shafts allows for the use of different coupling methods, ensuring a reliable and secure connection regardless of the length variation or equipment configuration.
6. Customization Options: PTO shafts can be customized to handle specific length variations and connection methods. Manufacturers offer options to select different lengths of telescoping sections to match the specific distance between the power source and driven machinery. Additionally, PTO shafts can be tailored to accommodate various connection methods through the selection of splined shaft sizes, yoke designs, and coupling mechanisms. This customization enables PTO shafts to meet the specific requirements of different equipment setups, ensuring optimal power transfer and compatibility.
7. Safety Considerations: When handling variations in length and connection methods, it is essential to consider safety. PTO shafts incorporate protective guards and shields to prevent accidental contact with rotating components. These safety measures must be appropriately adjusted and installed to provide adequate coverage and protection, regardless of the PTO shaft’s length or connection configuration. Safety guidelines and regulations should be followed to ensure the proper installation, adjustment, and use of PTO shafts in order to prevent accidents or injuries.
By incorporating telescoping designs, splined shafts, adjustable sliding yokes, universal joints, and versatile coupling mechanisms, PTO shafts can handle variations in length and connection methods. The flexibility of PTO shafts allows them to adapt to different equipment setups, ensuring efficient power transfer while maintaining alignment and safety.
PTO 샤프트 작업 시 어떤 안전 예방 조치를 따라야 합니까?
동력인출축(PTO) 작업 시에는 사고를 예방하고 장비 작동자 또는 주변 작업자의 안전을 확보하기 위해 엄격한 안전 수칙을 준수해야 합니다. PTO 축은 회전하는 기계 장치이므로 제대로 다루지 않으면 심각한 위험을 초래할 수 있습니다. 다음은 PTO 축 작업 시 반드시 지켜야 할 몇 가지 중요한 안전 수칙입니다.
1. 장비에 익숙해지십시오: PTO 샤프트를 작동하거나 그 근처에서 작업하기 전에, 특정 PTO 샤프트 구성, 안전 기능 및 관련 기계를 포함하여 장비의 작동 방식을 철저히 이해하는 것이 매우 중요합니다. PTO 샤프트 및 관련 장비에 대한 제조업체의 지침과 안전 가이드라인을 읽고 따르십시오. 안전한 작업을 위해서는 장비에 대한 교육과 숙지가 필수적입니다.
2. 적절한 개인 보호 장비(PPE)를 착용하십시오. PTO 샤프트 작업 시에는 부상 위험을 최소화하기 위해 적절한 개인 보호 장비(PPE)를 착용해야 합니다. PPE에는 보안경, 귀마개, 장갑, 튼튼한 신발 등이 포함될 수 있습니다. PPE는 파편, 소음, 회전 부품과의 우발적인 접촉과 같은 잠재적 위험으로부터 작업자를 보호합니다.
3. 경비 및 보호: PTO 샤프트 및 관련 기계 장치에는 적절한 보호 장치와 차폐 장치가 장착되어 있어야 합니다. 보호 장치는 회전 부품과의 우발적인 접촉을 방지하여 끼임이나 부상의 위험을 줄여줍니다. PTO 샤프트에는 회전축과 노출된 유니버설 조인트를 덮는 보호 장치가 있어야 합니다. PTO 샤프트로 구동되는 기계 장치 또한 움직이는 부품과의 접촉을 방지하기 위해 적절한 보호 장치를 갖추어야 합니다.
4. PTO 샤프트 구성 요소를 단단히 고정하고 정렬하십시오. PTO 샤프트를 작동하거나 연결하기 전에 모든 구성 요소가 단단히 고정되고 정렬되었는지 확인하십시오. 구성 요소가 헐거워지거나 정렬이 잘못되면 샤프트가 이탈되거나 불균형이 발생하여 고장이 발생할 수 있습니다. 커플링, 요크 및 기타 연결 지점의 올바른 설치 및 조임에 대한 제조업체의 지침을 따르십시오. PTO 샤프트 및 관련 장비에 과도한 스트레스, 진동 및 조기 마모가 발생하는 것을 방지하려면 올바른 정렬이 매우 중요합니다.
5. 헐렁한 옷과 장신구는 피하세요. PTO 샤프트 또는 관련 기계 장치에 걸릴 수 있는 헐렁한 옷, 장신구 또는 기타 물건은 착용하지 마십시오. 긴 머리카락은 단정하게 묶고, 헐렁한 옷은 바지 안으로 넣어 입고, 늘어지는 액세서리는 제거하거나 제대로 고정하십시오. 헐렁한 물건이 회전하는 부품에 걸려 심각한 부상이나 끼임 사고를 유발할 수 있습니다.
6. 안전 기능을 개조하거나 제거하지 마십시오. PTO 샤프트에는 가드 실드, 안전 커버, 토크 제한 장치와 같은 안전 장치가 장착되어 있습니다. 이러한 장치는 잠재적인 위험으로부터 보호하기 위해 설계되었으며, 개조, 우회 또는 제거해서는 안 됩니다. 안전 장치를 변경하거나 비활성화하면 사고 및 부상 위험이 크게 증가할 수 있습니다. 안전 장치가 손상되었거나 제대로 작동하지 않는 경우 즉시 수리하거나 교체해야 합니다.
7. 정비 전에 전원을 차단하십시오. PTO 샤프트 또는 관련 기계 장치에 대한 유지 보수, 수리 또는 조정을 수행하기 전에 전원을 완전히 차단하고 분리해야 합니다. 여기에는 엔진을 끄고, 전원 공급 장치를 분리하고, 모든 안전 잠금 장치 또는 메커니즘을 작동시키는 것이 포함됩니다. 유지 보수 작업 중 우발적인 전원 공급 또는 시동을 방지하기 위해 잠금/태그아웃 절차를 따라야 합니다.
8. 정기 유지보수 및 점검: PTO 샤프트 및 관련 장비의 정기적인 유지보수 및 점검은 안전한 작동에 필수적입니다. 제조업체에서 권장하는 유지보수 일정을 준수하고, 정기적인 점검을 통해 마모, 손상 또는 정렬 불량의 징후를 파악하십시오. 원활한 작동을 위해 제조업체의 지침에 따라 유니버설 조인트에 윤활유를 도포하십시오. 잠재적인 위험을 예방하기 위해 필요한 유지보수 또는 수리 사항을 즉시 처리하십시오.
9. 교육 및 소통: PTO 축을 조작하거나 그 근처에서 작업하는 모든 사람은 안전 작업 절차, 위험 요소 식별 및 비상 절차에 대한 적절한 교육을 받아야 합니다. PTO 축의 존재 및 작동 방식에 대한 명확한 의사소통을 장려하여 우발적인 접촉이나 간섭을 방지해야 합니다. 팀으로 작업하거나 소음이 심한 장비 근처에서 작업할 때는 신호나 무전기와 같은 효과적인 의사소통 방법을 마련해야 합니다.
10. 주변 상황을 인지하세요: PTO 샤프트 작업 시에는 주변 상황을 항상 인지하십시오. 작업자, 장애물 및 잠재적 위험 요소의 위치를 항상 살피십시오. PTO 샤프트 주변에 깨끗하고 안전한 작업 공간을 확보하십시오. 주의가 산만해지지 않도록 작업에 집중하여 부주의로 인한 사고를 예방하십시오.
이러한 안전 수칙을 준수하면 PTO 샤프트 작업 시 사고 및 부상 위험을 최소화할 수 있습니다. 안전하고 생산적인 작업 환경을 보장하기 위해서는 안전이 항상 최우선 순위가 되어야 합니다.
Which industries commonly use PTO shafts for power transmission?
PTO shafts (Power Take-Off shafts) are widely used in various industries where power transmission is required to drive machinery and equipment. Their versatility, efficiency, and compatibility with different types of machinery make them valuable components in several sectors. Here’s a detailed explanation of the industries that commonly use PTO shafts for power transmission:
1. Agriculture: The agricultural industry extensively relies on PTO shafts for power transmission. Tractors equipped with PTOs are commonly used to drive a wide range of agricultural implements and machinery. PTO-driven equipment includes mowers, balers, tillers, seeders, sprayers, grain augers, harvesters, and many more. PTO shafts allow for the efficient transfer of power from the tractor’s engine to these implements, enabling various agricultural operations such as cutting, baling, tilling, planting, spraying, and harvesting. The agricultural sector heavily depends on PTO shafts to enhance productivity and streamline farming processes.
2. Construction and Earthmoving: In the construction and earthmoving industry, PTO shafts find applications in machinery used for excavation, grading, and material handling. PTO-driven equipment such as backhoes, loaders, excavators, trenchers, and stump grinders utilize PTO shafts to transfer power from the prime movers, typically hydraulic systems, to drive the necessary attachments. These attachments require the high torque and power provided by PTO shafts to perform tasks like digging, loading, trenching, and grinding. PTO shafts allow for versatile and efficient power transmission in construction and earthmoving operations.
3. Forestry: The forestry industry utilizes PTO shafts for power transmission in various logging and timber processing equipment. PTO-driven machinery such as wood chippers, sawmills, log splitters, and debarkers rely on PTO shafts to transfer power from tractors or dedicated power units to perform tasks like chipping, sawing, splitting, and debarking wood. PTO shafts provide the necessary power and torque to drive the cutting and processing mechanisms, enabling efficient and productive forestry operations.
4. Landscaping and Groundskeeping: PTO shafts play a crucial role in the landscaping and groundskeeping industry. Equipment like lawn mowers, rotary cutters, flail mowers, and aerators utilize PTO shafts to transfer power from tractors or dedicated power units to drive the cutting or grooming mechanisms. PTO shafts enable efficient power transmission, allowing operators to maintain lawns, parks, golf courses, and other outdoor spaces with precision and productivity.
5. Mining and Quarrying: PTO shafts have applications in the mining and quarrying industry, particularly in equipment used for material extraction, crushing, and screening. PTO-driven machinery such as crushers, screeners, and conveyors rely on PTO shafts to transfer power from engines or motors to drive the crushing and screening mechanisms, as well as the material handling systems. PTO shafts provide the necessary power and torque to process and transport bulk materials effectively in mining and quarrying operations.
6. Industrial Manufacturing: PTO shafts are utilized in various industrial manufacturing processes that require power transmission to drive specific machinery and equipment. Industries such as food processing, textile manufacturing, paper production, and chemical processing may use PTO-driven machinery for tasks like mixing, blending, cutting, extruding, and conveying. PTO shafts enable efficient power transfer to these machines, ensuring smooth and reliable operation in industrial manufacturing settings.
7. Utilities and Infrastructure Maintenance: PTO shafts find applications in utilities and infrastructure maintenance operations. Equipment like street sweepers, sewer cleaners, road maintenance machines, and drain augers utilize PTO shafts to transfer power from trucks or dedicated power units to perform tasks like sweeping, cleaning, and maintenance of roads, sewers, and other public infrastructure. PTO shafts enable efficient power transmission, ensuring effective and reliable operation of these utility and maintenance machines.
8. Others: PTO shafts are also used in several other industries and sectors where power transmission is required. This includes applications in the transportation industry for powering refrigeration units, fuel pumps, and hydraulic systems in trucks and trailers. PTO shafts also find applications in the marine industry for powering winches, pumps, and other equipment on boats and ships.
In summary, PTO shafts are commonly used in a wide range of industries for power transmission. These industries include agriculture, construction and earthmoving, forestry, landscaping and groundskeeping, mining and quarrying, industrial manufacturing, utilities and infrastructure maintenance, transportation, and marine sectors. PTO shafts play a critical rolein enhancing productivity, enabling efficient operation of machinery, and facilitating various tasks in these industries.
editor by CX 2024-03-07
